Best Compact Router Corded: 9 Picks in 2026

A corded compact router has a simple appeal: plug it in, set the depth, and keep working without watching a battery gauge. Yet the small cylindrical body can hide major differences. One model offers a broad 10,000 to 32,000 RPM range for matching speed to the bit and material, while another runs at a fixed 35,000 RPM. That distinction matters when a cutter starts scorching an edge or a delicate laminate-trimming job calls for a calmer approach.

The usual buying mistake is treating maximum RPM or a bulging accessory case as proof of a better router. Speed control, collet size, depth adjustment, base visibility, guides, and dust provisions affect daily work far more than a flashy number on the box. A 1/4-inch bit cannot safely go into an unconfirmed collet, and a fixed base with a depth scale still does not provide plunge action, so the small print deserves a careful look.

Different priorities lead to different picks. A beginner may value included bits and guides, while someone shaping hardwood edges may prefer variable speed and stronger dust management. The AVID POWER 6.5 Amp Compact Router is the strongest overall package here because it combines six speeds, rack-and-pinion depth adjustment, dual LEDs, two documented collets, and useful routing accessories without drifting beyond the compact fixed-base format.

Quick Answer

• Best overall: AVID POWER 6.5 Amp Compact Router for its variable speed, rack-and-pinion adjustment, lighting, dust hood, and broad accessory package.
• Best compact starter kit: TEENO 6.5 Amp Compact Wood Router for six speed settings, two documented collets, guides, dust extraction hardware, and a 15-piece bit set.
• Best fixed-speed kit: TwoWin 800W Compact Palm Router for buyers who want a 110V router with 15 bits and storage included.
• Best for straightforward edge work: AVID POWER 5.3 Amp Compact Wood Router for its 1/4-inch collet, fixed base, guides, and uncomplicated 35,000 RPM operation.
• Best for basic DIY trimming: ADEGSO 550W Corded Compact Router for a simple fixed-speed format, subject to confirming collet compatibility.
• Best For Low-Speed Control: Makita RT0701C Compact Router for variable speed, soft start, and rack-and-pinion depth adjustment.
• Best For Fine Depth Adjustment: Bosch GKF125CEK Colt Palm Router Kit for microfine depth control, an edge guide, and a carrying case.
• Best For Bit Visibility: DEWALT DWP611 Compact Router for dual LEDs, a clear sub-base, and an adjustment ring.
• Best For Template Guidance: WORKPRO 6.5 Amp Corded Compact Router Kit for included template guidance and a dust hood.

Best Compact Router Corded Comparison Table

The reviews below explain where each router fits once speed control, collets, guides, and adjustment details enter the picture.

1. AVID POWER 6.5 Amp Compact Router — Best Overall

The AVID POWER brings together the controls that make a corded palm router easier to adapt from one operation to the next. Its 800W, 6.5-amp motor is paired with six settings across a 10,000 to 32,000 RPM range. That lower end is especially meaningful. Instead of forcing every cutter and workpiece through maximum speed, the dial lets the operator respond to the material, cutter geometry, and manufacturer guidance.

Adjustment and visibility receive similar attention. A rack-and-pinion system controls depth in the fixed base, while a quick lock secures the setting. Dual LEDs illuminate the cutting area, and an included dust hood can connect to a standard shop vacuum. The package also contains an edge guide, roller guide, five bit types, wrenches, spare carbon brushes, and both 1/4-inch and 3/8-inch collets. That second collet is an unusual distinction within this group, though every cutter still needs to match the installed collet and the router’s operating limits.

Pros

• Six speed settings cover a documented range of 10,000 to 32,000 RPM.
• Rack-and-pinion depth adjustment offers a controlled way to set the fixed base.
• Dual LEDs improve sight of layout lines and the immediate cutting area.
• Included dust hood provides a documented connection point for a standard shop vacuum.
• Package includes 1/4-inch and 3/8-inch collets, five bits, two guides, wrenches, and spare brushes.

Cons

• The supplied configuration is a fixed-base router, so its depth adjustment should not be mistaken for plunge action.
• The large accessory bundle may be unnecessary for buyers who already own compatible bits and guides.

This model fits woodworkers who expect one compact router to handle edge profiles, guided trimming, hinge recesses, and straight grooves with fewer accessory purchases. Its central advantage is control rather than raw maximum speed. Buyers specifically seeking plunge routing or confirmed router-table compatibility should look for a configuration documented for those jobs instead.

To buy this product, click here.

2. TEENO 6.5 Amp Compact Wood Router — Best Starter Kit

The TEENO package is aimed squarely at a buyer starting without a drawer full of routing hardware. Its 800W, 6.5-amp motor runs from 15,000 to 32,000 RPM across six settings, offering more adjustment than a single-speed trimmer. A transparent base keeps the cutter area visible, while a quick-release lever and readable depth scale handle setup. Those features are useful for repeatable edge profiles and shallow grooves, provided the work is secured and cuts are approached in controlled passes.

The accessory list is broad: 15 carbide-tipped bits stored in a wooden box, a combined edge and circle guide, a roller guide, a dust hood, wrenches, two spare carbon brushes, and two collets. The supplied collets are 1/4 inch and 6 mm, which must be treated as distinct sizes rather than near substitutes. A rubberized grip and externally accessible brushes address handling and maintenance, while the dust hood offers a practical path for connecting extraction. The result is a full starting package, although quantity alone says nothing about which bit profiles an individual project will actually require.

Pros

• Six selectable speeds span a documented 15,000 to 32,000 RPM range.
• Transparent base and depth scale keep setup and the cutter area visible.
• Includes separate 1/4-inch and 6 mm collets for correctly matched shanks.
• Dust hood provides a connection point for a standard shop vacuum.
• Package supplies 15 bits, edge and circle guidance, a roller guide, wrenches, brushes, and storage.

Cons

• The 15,000 RPM minimum is higher than the AVID POWER 6.5 Amp model’s documented 10,000 RPM minimum.
• The fixed-base configuration does not provide a documented plunge mechanism.

This package makes sense for a beginner building a compact routing setup or a DIYer who needs several common accessories at once. The main trade-off is that the generous kit can obscure a more basic question: whether its included profiles match the planned work. Buyers who already own 1/4-inch cutters may prefer the finer low-speed range and dual LEDs of the top pick.

To buy this product, click here.

3. TwoWin 800W Compact Palm Router — Best Fixed-Speed Accessory Kit

TwoWin takes a direct approach with a 110V, 800W compact router running at a documented 30,000 RPM. There is no supplied evidence of variable-speed control, so this is best viewed as a fixed-speed tool for suitable cutters and materials. That simplicity can work for routine edging, trimming, veining, and grooving, but it puts more responsibility on cutter selection, feed control, and adherence to each bit manufacturer’s speed limit.

The transparent base helps expose the cutting line, and a lift knob with a scale handles depth changes. Two guides are included: a straight guide for working parallel to an edge and a trimming guide for following suitable workpiece contours. The package’s headline attraction is its 15-piece bit assortment in a wooden organizer, accompanied by wrenches, a carbon brush, and mounting hardware. One key specification remains unclear in the supplied information, however. The collet size is not stated, so buyers should verify it before choosing additional bits or assuming that an existing collection will fit.

Pros

• Documented 110V input clearly suits mains-powered workshop use.
• 800W motor is specified for routing and trimming applications.
• Transparent base gives a clearer view around the cutting area.
• Straight and trimming guides support two common methods of controlling a cut.
• Includes 15 bits, a wooden organizer, wrenches, a replacement carbon brush, and related hardware.

Cons

• The documented 30,000 RPM operating speed is fixed rather than adjustable.
• Collet size is not clearly specified in the supplied product information and needs verification before bit purchases.

The TwoWin suits someone who wants a mains-powered palm router and assorted cutters in one box, especially for basic decorative and edge work. Its fixed speed makes it less adaptable than either six-speed model above, and the unclear collet specification is a meaningful purchasing checkpoint. Verify shank compatibility first, then judge the kit by the profiles the work genuinely calls for.

To buy this product, click here.

4. AVID POWER 5.3 Amp Compact Wood Router — Best For Straightforward Edge Work

This smaller AVID POWER router pairs a 630W, 5.3-amp motor with a fixed 35,000 RPM speed. Its lean specification suits uncomplicated trimming and detail work where the cutter is approved for that speed. A fixed-speed router can feel refreshingly direct: set the bit, adjust the base, secure the stock, and begin a controlled pass. The catch is reduced flexibility, since there is no documented speed dial for easing back from that brisk maximum.

The package covers the practical basics more thoroughly than its simple controls might suggest. A smooth depth-adjustment system works with a secure fixed base, while a rubber-covered gripping area supports palm control. The router accepts documented 1/4-inch shanks and comes with five matching bits, a straight guide, a roller guide, two wrenches, and replacement carbon brushes. Venting is provided around the motor housing. Together, those details make it a focused edge-routing setup rather than a feature-heavy machine attempting to cover every operation.

Pros

• Corded 630W, 5.3-amp motor avoids battery and charger management.
• Documented 1/4-inch collet removes uncertainty about the included bit shank size.
• Straight guide supports cuts held at a set distance from a workpiece edge.
• Roller guide provides another control option for suitable curved or contoured edges.
• Five bits, two wrenches, and replacement carbon brushes are included.

Cons

• The documented 35,000 RPM speed is fixed, leaving no lower setting for applications that call for slower operation.
• Its fixed base does not offer documented plunge action.

This router fits light trimming, shallow edge profiles, hinge work, and grooves using appropriate 1/4-inch cutters. It asks less setup interpretation than models with an unspecified collet, yet its high fixed speed is the decisive trade-off. Choose it for simple, compatible tasks rather than projects that demand frequent speed changes or plunge entry into the middle of a panel.

To buy this product, click here.

5. ADEGSO 550W Corded Compact Router — Best For Basic DIY Trimming

The ADEGSO is the most stripped-back option in this group. Its corded 550W motor runs at a documented 32,000 RPM, and the compact body is intended for trimming, edging, beveling, grooving, and shaping. A comfortable grip and light form factor are emphasized, which makes sense for a palm router guided along a workpiece edge. Speed variation is not documented, so cutter choice and operating limits deserve particular attention before the switch comes on.

A transparent base gives the operator a view around the bit, while a depth scale provides a reference for setting the cut. Those are useful features on shelf edges, small craft pieces, and other jobs where seeing the layout line helps. Still, the supplied details leave two purchasing questions open: the collet size is not stated, and the included accessory package is not clearly itemized. That uncertainty does not make the router unusable, but it does mean a careful buyer should confirm shank compatibility and package contents rather than relying on assumptions.

Pros

• Documented corded power supports uninterrupted use near a suitable outlet.
• Compact body is intended for trimming, grooving, edging, beveling, and shaping work.
• Transparent base improves visibility around the cutter and layout line.
• Depth scale gives a visible reference while adjusting the routing depth.
• Comfort-oriented grip and lightweight format support handheld maneuvering.

Cons

• The documented 32,000 RPM speed is fixed, with no supplied evidence of variable-speed control.
• Collet size is not clearly specified, so compatible cutter shanks must be confirmed before purchase.

The ADEGSO is best reserved for a buyer seeking a basic corded trimmer for modest DIY work and willing to verify the missing compatibility details. Its transparent base and depth scale are genuinely useful, but the AVID POWER models disclose more about their collets and included accessories. That difference matters if the goal is to begin routing immediately with fewer unanswered setup questions.

To buy this product, click here.

6. Makita RT0701C Compact Router — Best For Low-Speed Control

The Makita RT0701C combines a slim fixed-base format with a variable-speed range of 10,000 to 30,000 RPM. Its 6.5-amp motor carries a 1.25 HP maximum rating, while soft start makes startup more controlled. Electronic speed control helps maintain speed under load. For someone moving between suitable edge profiles and guided cuts, that combination provides more flexibility than a fixed-speed trimmer.

Fine depth changes use a rack-and-pinion mechanism, and a quick-release cam lock handles depth adjustment and base removal. The documented package includes a fixed trimmer base, 1/4-inch collet, straight guide, and two wrenches. Makita also lists compatibility with industry-standard template guides. This is the RT0701C fixed-base tool configuration, not the RT0701CX7 plunge-base kit or a renewed RT0701CR listing.

Pros

• Variable speed spans 10,000 to 30,000 RPM.
• Soft start supports controlled motor startup.
• Electronic speed control helps maintain speed under load.
• Rack-and-pinion adjustment supports fine depth settings.
• Fixed-base package includes a 1/4-inch collet, straight guide, and wrenches.

Cons

• The selected fixed-base package does not include a plunge base.
• Its 1/4-inch collet does not accommodate 1/2-inch shank cutters.

The Makita is a useful choice for buyers prioritizing adjustment and motor control over a large included bit assortment. Check guide and accessory requirements for the planned task, then choose cutters within the router and bit manufacturers’ limits.

To buy this product, click here.

7. Bosch GKF125CEK Colt Palm Router Kit — Best For Fine Depth Adjustment

Bosch gives this Colt kit a useful balance of palm-size handling and setup control. The 1.25 HP maximum-rated motor runs from 16,000 to 35,000 RPM, with soft start and Constant Response circuitry to help maintain the selected speed under load. LED lighting improves visibility around the cutter, while the PR101 fixed base provides both coarse and microfine depth adjustment.

The GKF125CEK configuration includes the router, fixed base, PR102 straight-edge guide, PR114 self-releasing 1/4-inch collet chuck, wrench, and carrying case. The edge guide can position the bit up to 3-5/8 inches from the workpiece edge. A swiveling cord connection helps with cord positioning. The CEK kit should not be confused with the CEPK combination kit, which adds a plunge base.

Pros

• Variable speed covers 16,000 to 35,000 RPM.
• Coarse and microfine controls support precise depth setup.
• Soft start and Constant Response circuitry assist motor control.
• LED lighting improves visibility around the bit.
• The CEK kit includes a straight-edge guide and carrying case.

Cons

• The selected CEK package does not include a plunge base.
• Its 16,000 RPM minimum is higher than the Makita’s 10,000 RPM minimum.

This kit suits edge work and guided routing where depth control and organized storage matter. The included guide is useful, but cutter diameter, shank size, feed direction, and depth still need to match the manual and the workpiece.

To buy this product, click here.

8. DEWALT DWP611 Compact Router — Best For Bit Visibility

The DEWALT DWP611 puts visibility and adjustment at the center of its fixed-base design. Dual LEDs illuminate the cutting area through a clear sub-base, and the D-shaped base supports edge-routing work. Its 1.25 HP maximum-rated motor offers a documented 16,000 to 27,000 RPM range. Soft start and electronic feedback help manage startup and maintain motor speed during the cut.

An adjustment ring controls depth changes to within 1/64 inch, while a large spindle-lock button supports single-wrench bit changes. The extended 1/4-inch collet provides a documented match for 1/4-inch shank cutters. This listing is the DWP611 fixed-base router, rather than the DWP611PK fixed-and-plunge kit. Buyers needing plunge travel should check the exact package instead of assuming the extra base is included.

Pros

• Dual LEDs and a clear sub-base improve cutter visibility.
• Variable speed spans 16,000 to 27,000 RPM.
• Soft start and electronic feedback support motor control.
• Adjustment ring allows controlled depth changes.
• Large spindle-lock button assists single-wrench bit changes.

Cons

• The selected fixed-base package does not include a plunge base.
• Its 27,000 RPM maximum is lower than the Bosch Colt’s 35,000 RPM maximum.

The DWP611 fits buyers who value a clear view of edge profiles and an accessible depth-adjustment ring. Its speed range is narrower than several alternatives here, so confirm that the intended cutter is suitable for the available settings.

To buy this product, click here.

9. WORKPRO 6.5 Amp Corded Compact Router Kit — Best For Template Guidance

WORKPRO combines a 6.5-amp corded motor with six speed settings from 12,000 to 30,000 RPM. Rack-and-pinion depth adjustment supports setup, while the fixed base keeps the package focused on handheld trimming and guided cuts.

The kit includes six bits, straight and trimming guides, a template guide, two wrenches, a dust hood, and separate 1/4-inch and 3/8-inch collets. Match each cutter to its exact collet; the two sizes are not interchangeable.

Pros

• Six selectable speed settings.
• Rack-and-pinion depth adjustment.
• Includes a template guide.
• Straight and trimming guides supplied.
• Dust hood and six bits included.

Cons

• The selected kit supplies a fixed base only.
• Included bit profiles may not suit every project.

Choose this package when the included guidance accessories match the work. Check cutter compatibility and template requirements before routing.

To buy this product, click here.

Buying Guide

Variable Speed Versus Fixed Speed

Variable speed is more than a deluxe control on the side of the motor. Router bits vary in diameter and geometry, and each cutter has operating limits that must be observed. Material behavior changes too. A lower available setting gives the operator another way to manage an application, while a fixed-speed tool requires every selected cutter and task to suit its single operating speed.

The range itself deserves scrutiny. The AVID POWER 6.5 Amp model reaches down to a documented 10,000 RPM, while the TEENO begins at 15,000 RPM. Makita runs from 10,000 to 30,000 RPM, WORKPRO from 12,000 to 30,000 RPM, Bosch from 16,000 to 35,000 RPM, and DEWALT from 16,000 to 27,000 RPM. TwoWin, the AVID POWER 5.3 Amp, and ADEGSO are listed at fixed speeds between 30,000 and 35,000 RPM. A high maximum can be useful for suitable small cutters, but the number by itself does not establish cleaner work or broader capability.

Motor Ratings Without Misleading Comparisons

Manufacturers may describe compact routers using watts, amperes, horsepower, or voltage. Those measurements are related to different electrical characteristics and should not be casually treated as interchangeable performance scores. An 800W listing does not reveal every detail about output at the cutter, and a claimed horsepower figure should be read as supplied rather than reverse-calculated from wattage.

Match the motor specification to practical needs instead. Edge trimming and modest profiling fit the compact-router format, while deep material removal may call for several controlled passes or a larger router configuration. Trying to make a palm router behave like a heavy plunge router can strain control, cutter selection, and the workpiece long before the numbers on the label settle the debate.

Collet Size And Bit Compatibility

The collet clamps the bit shank, making its documented size a hard compatibility requirement. A 1/4-inch shank belongs in a 1/4-inch collet, while 6 mm and 3/8-inch shanks need their exact matching collets. Similar appearance is irrelevant here. Improvised substitutions and loose fitting are unsafe, and the router should be unplugged before any bit or collet change.

Seven picks disclose their collets clearly. The larger AVID POWER supplies 1/4-inch and 3/8-inch collets, the smaller AVID POWER lists a 1/4-inch collet, and the TEENO includes separate 1/4-inch and 6 mm collets. Makita, Bosch, and DEWALT specify 1/4-inch collets, while WORKPRO supplies 1/4-inch and 3/8-inch collets. TwoWin and ADEGSO do not clearly identify collet size in the supplied data, so that specification should be confirmed before buying extra cutters.

Depth Adjustment And Base Type

A compact fixed base moves along the motor housing to establish cutter exposure below the baseplate. Rack-and-pinion mechanisms, scales, lift knobs, and locking levers can all assist with this process, but none automatically turns the router into a plunge model. Plunge routing requires a documented mechanism that lets the running cutter descend under controlled spring-loaded movement.

For edge profiles and trimming, a fixed base is often direct and manageable. Grooves beginning at an open edge can also suit this format. A stopped groove or mortise beginning within the workpiece raises a different setup question, so buyers needing that operation should seek a router with a documented plunge base rather than improvising with a fixed-base trimmer.

Guides, Visibility, And Dust Collection

An edge guide keeps the cutter a controlled distance from a reasonably straight workpiece edge. A roller guide follows suitable contours in a different fashion, while a transparent base or LED helps expose the immediate cutting area. These features assist control, but they cannot compensate for a loose workpiece, an unsuitable bit, or a depth setting that asks too much from one pass.

Dust hardware also varies. The AVID POWER 6.5 Amp, TEENO, and WORKPRO packages explicitly include dust hoods, while dust hardware and accessory requirements differ across the other selections. Extraction can reduce loose chips and improve visibility, though it never replaces eye protection, hearing protection, suitable respiratory precautions, or cleanup around the work area.

Accessory Kits And Actual Value

A case holding 15 bits looks impressive, especially beside a router supplied with five. Yet a set is valuable only if its shank matches the collet and its profiles suit planned projects. Someone rounding shelf edges may use one profile repeatedly, while a cabinet project could call for straight, chamfer, and roundover cutters across several setups.

Examine guides, wrenches, brushes, dust parts, and collets with the same discipline. Included accessories can reduce initial purchases, but they should not outweigh speed control or confirmed compatibility. A smaller package with the correct collet and a useful adjustment system can make far more sense than a crowded box containing cutters that remain untouched.

Basic Routing Safety

Secure the workpiece, inspect the cutter, use the correct collet, and follow the bit and router manuals. Check that the cutter is suitable for the selected speed, keep hands away from the cutting path, and allow the router to stop fully before setting it down. Eye and hearing protection belong in the setup, while dust control should reflect the material being cut.

Unplug a corded router before changing bits, adjusting a collet, or carrying out maintenance. Start with controlled passes rather than forcing a deep cut, and account for the router’s rotation and the chosen method of guidance. Handheld and table-mounted routing involve different feed considerations, so a familiar habit from one setup should never be transferred blindly to another.

Best Compact Router Corded FAQ

What Is A Corded Compact Router Best Used For?

A corded compact router is commonly used for edge trimming, laminate work, chamfers, roundovers, shallow grooves, hinge recesses, and other detail operations using suitable bits. Its slim palm-grip format favors maneuverability, while the power cord supports continuous operation near an outlet.

Is A Compact Router Powerful Enough For Hardwood?

A compact router can perform suitable operations in hardwood, but motor ratings alone do not establish the correct depth, bit, or feed. Use a sharp compatible cutter, observe its RPM limit, secure the stock, and make controlled passes rather than demanding full depth at once. The AVID POWER 6.5 Amp listing specifically describes applications involving hard oak, but actual setup still depends on the cutter and project.

Do I Need Variable Speed On A Palm Router?

Variable speed is especially useful if the router will run different cutter types or work across varied materials. It lets the operator select a setting within the documented range and follow cutter guidance. A fixed-speed model can handle appropriate tasks, but every bit used must be suitable for that single speed.

Can These Fixed-Base Routers Make Plunge Cuts?

All nine selections here are specified in fixed-base configurations. A depth scale, lift knob, or rack-and-pinion adjustment sets cutter exposure in a fixed base; it does not provide controlled plunge travel. Some router families accept optional plunge bases, but that does not mean a plunge base is supplied in the selected package. Seek a compatible package explicitly supplied with a plunge base for plunge-dependent operations.

Can A Compact Router Use 1/2-Inch Shank Bits?

None of the selected routers is documented here with a 1/2-inch collet. Never insert a 1/2-inch shank into a different collet or assume an adapter is acceptable. Use only the exact collet and cutter sizes supported by the router manufacturer.

Which Router Here Has The Broadest Documented Speed Range?

The AVID POWER 6.5 Amp Compact Router has the broadest supplied range, running from 10,000 to 32,000 RPM across six settings. The TEENO also provides six settings, with a documented range of 15,000 to 32,000 RPM. Makita, WORKPRO, Bosch, and DEWALT also provide variable speed within their respective ranges. TwoWin, the AVID POWER 5.3 Amp, and ADEGSO are the fixed-speed choices.

Are Included Router Bits Ready For Every Project?

No. An included bit must have the correct shank, appropriate profile, suitable dimensions, and an RPM rating compatible with the router’s setting. Project material, cutter clearance, desired depth, and manufacturer instructions still govern whether a particular bit belongs in the cut.

Can These Routers Be Mounted In A Router Table?

Router-table compatibility is not clearly documented for the selected models in the supplied information. Do not infer mounting fit from the base shape or motor diameter. Confirm the exact router model, plate pattern, adjustment access, switch access, and table manufacturer guidance before attempting installation.

Final Verdict

The AVID POWER 6.5 Amp Compact Router remains an accessory-focused choice among these nine corded models. Its 10,000 to 32,000 RPM range, rack-and-pinion depth adjustment, dual LEDs, dust hood, guides, and two collet sizes cover the decisions that matter after the packaging is gone. It remains a fixed-base router, but within that category it gives the operator unusually broad control.

The TEENO 6.5 Amp Compact Wood Router is the stronger starter package for someone who needs bits, guides, storage, and dust hardware together. TwoWin offers another accessory-heavy route with a fixed 30,000 RPM speed, while the smaller AVID POWER and ADEGSO favor simpler trimming duties. Before buying, match the collet to the cutters, decide whether variable speed matters, and confirm that a fixed base supports the intended cuts.

The Makita RT0701C adds soft start and fine depth adjustment, while the Bosch GKF125CEK combines microfine adjustment with an edge guide and case. The DEWALT DWP611 emphasizes dual-LED visibility and an adjustment ring, and WORKPRO adds template guidance. Choose between them by the cutter, base configuration, and accessories the work actually needs.